HP Virtual Connect 1.10Gb-F Ethernet Module for c-Class BladeSystem - Manual (Page 26)

Command line 26
Item Description
Syntax remove fabric
Parameter
Name (required) The name of an existing fabric or "*" to be removed
Examples
->remove fabric VFabric_1
Removes VC FC SAN fabric VFabric_1
->remove fabric *
Removes all VC FC fabrics from the domain
Item Description
set fabric Modify an existing FC SAN fabric.
Syntax set fabric [-loadBalance] [Name=]
[Speed=] [Login=]
[Ports=]
Parameter
FabricName
(required)
The name of an existing FC SAN fabric to modify (required)
Option
loadBalance Perform load balancing on a fabric configured for dynamic login distribution.
Properties
Name (optional) The new name of the fabric
Speed (optional) The port speed for the uplink ports in the fabric Valid values include: “Auto”, “1Gb”,
“2Gb”, and “4Gb”. The default port speed is “Auto”.
Login (optional) Specifies the login distribution scheme to use for load balancing. Valid values
include: "Static" and "Dynamic". The default login distribution is "Dynamic".
Ports (optional) A list of one or more logical FC ports associated with the fabric. Each port is
specified in the format ",,...", where port is the interconnect module
port to be modified in the fabric (affects all modules within a bay group). A blank
string removes all the ports that are assigned to the fabric.
Examples
->set fabric MyFabric1 Name=MyNewName1
Changes the name of an existing fabric
->set fabric MyFabric2 Speed=2Gb Login=Dynamic
Modifies the port speed and login distribution
->set fabric MyFabric3 Ports=1,2,3,4
Modifies the fabric ports contained in the fabric
->set fabric MyFabric4 ports=””
Removes the fabric ports assigned to the fabric
->set fabric MyFabric5 -loadBalance
Performs load balancing on a fabric with dynamic login distribution
Item Description
show fabric Display all FC SAN fabrics.