HP Virtual Connect 1.10Gb-F Ethernet Module for c-Class BladeSystem User Manual
Page 61
Command line 61
Item Description
Role (optional)
The Role played by the port if the connection mode of the network or shared uplink
set is selected as "Failover". The default is "Primary".
Examples
->add uplinkport enc0:1:1 Network=MyNetwork
Adds a new uplink port (Bay 1, Port 1) to a network
->add uplinkport enc0:2:4 Network=MyNetwork Speed=1Gb
Adds a new uplink port (Bay 2, Port 4) to a network and sets the port speed
->add uplinkport enc0:2:3 UplinkSet=MyUplinkSet
Adds a new uplink port (Bay 2, Port 3) to a shared uplink port set
->add uplinkport enc0:2:4 Network=MyNetwork Role=Primary
Adds a new uplink port to a network with the connection mode as Failover and the
port role as Primary
Item Description
remove uplinkport Remove an uplink port element from a network or a shared uplink port set.
Syntax
remove uplinkport
UplinkSet=
Parameters
PortID (required) The name of the port to remove from a network (required). The port name must be in
the following format:
If EnclosureID is not specified, it defaults to the local enclosure.
Network
(optional)
The name of the network from which the port is to be removed
UplinkSet
(optional)
The name of the shared uplink port set from which the port is to be removed
Examples
->remove uplinkport enc0:1:2 Network=MyNetwork
Removes a specific uplink port (Bay 1, Port 2) from a network
->remove uplinkport * Network=BlueNetwork
Removes all uplink ports from a network named "BlueNetwork"
->remove uplinkport enc0:2:3 UplinkSet=SharedUplinkSet1
Removes a specific uplink port (Bay 2, Port 3) from a shared uplink set
Item Description
set uplinkport
Modify an uplink port that exists as a member of a network or shared uplink port set.
Syntax
set uplinkport
UplinkSet= d>] [Role= Parameter PortID (required) The name of the port to modify (required). The specified port must already be added to a network or uplink port set. The port name is in the format: Properties