HP Virtual Connect 1.10Gb-F Ethernet Module for c-Class BladeSystem User Manual
Page 45
Command line 45
Item Description
NoDefaultEnetConn
Do not add default Ethernet Network connections when creating the server
profile.
NoDefaultFcConn
Do not add default FC SAN connections when creating the server profile.
Properties
SNType (Optional)
The source of the serial number assignment to be used during the profile
creation. If not specified, the serial number is assigned as per the Virtual connect
default domain settings. Valid values include "Factory-Default" and "User-
Defined".
SerialNumber
(required if the
SNType is User-
Defined)
A custom user-defined serial number associated with the server profile. When the
profile is assigned to a device bay that contains a server, the server inherits the
virtual serial number. The user-defined serial number must start with the pattern
VCX01.
UUID (Optional)
A unique 128-bit identifier for the virtual server ID The format of the xxxxxxxx-
xxxx-xxxx-xxxx-xxxxxxxxxxxx where x is any alpha-numeric character. If no UUID
is specified, then one is auto-generated. The UUID can be specified only if the
SNType is User-Defined.
Examples
->add profile MyNewProfile
Creates a new profile and adds it to the domain, using default connections
->add profile MyNewProfile2 -NoDefaultEnetConn
Creates a new profile without adding default Ethernet connections
->add profile MyNewProfile2 -NoDefaultFcConn
Creates a new profile without adding default FC connections
->add profile MyNewProfile2 -NoDefaultEnetConn
-NoDefaultFcConn
Creates a new profile without adding default Ethernet and FC connections
->add profile MyNewProfile SNType=Factory-Default
Creates a new profile and uses the factory assigned serial number
->add profile MyNewProfile SNType=User-Defined
SerialNumber=VCX0113121 UUID=15713c60-fcf2-11dc-
a656-0002a5d5c51b
Creates a new profile and specifies a custom virtual serial number and UUID
Item Description
assign profile
Assign a server profile to a device bay.
Syntax
assign profile
Parameters
ProfileName
(required)
The unique name of the server profile to assign
DeviceBay
(required)
The device bay to assign the profile to, in the format:
EnclosureID:DeviceBayNumber
If EnclosureID is not specified, it defaults to the local enclosure.
Example