HP Virtual Connect 1.10Gb-F Ethernet Module for c-Class BladeSystem - Manual (Page 51)

Command line 51
Supported actions: help, show
Item Description
show server-port Display physical port information.
Syntax show server-port
Parameter
PortID (Optional) The reference of a port mapping ID. The PortID format is
EnclosureID:IOBay:Port. The Port ID can be referenced from the ID column
in the summary display. The detailed display shows any Flex NICs that might be
associated with a server port.
Examples
->show server-port
Displays summary listing of all physical server ports
->show server-port *
Displays detailed information for all physical server ports
->show server-port enc0:3:d2
Shows detailed information of a specific server port
server-port-map
Add new server port network mapping
Supported actions: add, help, remove, set, show
Item Description
add server-port-map Add a new server port network mapping, and allow server ports to be shared
among multiple VC Ethernet networks.
This command cannot be used if the domain setting VLanTagControl is currently
set to "Tunnel".
Syntax add server-port-map
[Uplinkset=] [Network=]
[VLanID=] [Untagged=]
Parameters
ConnectionID
(required)
The reference ID an existing enet-connection associated with a profile and a
server port. The format of the ConnectionId is .
Network (required) The name of a valid network to which the mapping will be added. A network
can be configured once for every profile connection, and every profile
connection can be configured for a maximum of 28 networks.
Properties
Uplinkset
(optional)
The name of the shared uplinkset to use with the server port mapping. If the
domain setting SharedServerVLanId is set to "true", then the Uplinkset is a
required value.
VLanID (optional) The VLAN ID to be used for the mapping. Valid values include 1 to 4094. If the
uplinkset name is specified, then the VLanID property should not be specified,
because the server VLAN ID is forced to be same as the VLAN ID used when
adding the network to the shared uplinkset.