HP Virtual Connect 1.10Gb-F Ethernet Module for c-Class BladeSystem User Manual
Page 21
Command line 21
Item Description
PXE
Enables or disables PXE on a connection. Valid values are "enabled",
"disabled", and "UseBios". Applies to Ethernet network connections
only.
PXE can be enabled on one connection per profile.
SpeedType (optional)
The requested operational speed for the server port. Valid values
include "Auto", "Preferred", and "Custom". The default value is
"Preferred".
If the speed type is "Auto", the maximum port speed is determined by
the maximum configured speed for the network.
If the speed type is "Preferred", the speed of the network is the same as
the preferred speed of the network to which the connection is
associated. If no preferred speed is configured for a network, it defaults
to "Auto".
If the speed type is "Custom", the user can configure any speed from
100Mb-MAX Configured speed for the network in 100Mb increments.
Speed (required if the
SpeedType is "Custom")
The user-defined speed for the server port. Valid values include 100Mb-
MAX Configured speed for the network in 100Mb increments.
Examples
->set enet-connection MyProfile 2
NetworkName=NewNetworkName
Changes the network of an Ethernet connection
->set enet-connection RedProfile 1 NetworkName=""
Sets a network connection to "Unassigned"
->set enet-connection GreenProfile 3 PXE=disabled
Disables PXE on an Ethernet connection
->set enet-connection MyProfile 1
SpeedType=Preferred
Modifies the Ethernet network connection to set the speed to "Preferred"
->set enet-connection MyProfile 1 SpeedType=Custom
Speed=2000
Modifies the Ethernet network connection to set the speed to 2Gb
Item Description
Show enet-connection
Display the ethernet connections associated with the server profiles.
Syntax
show enet-connection
Parameter
ConnectionID (optional)
The ID of an existing Ethernet connection. The ID format is
Ethernet connections. "*" displays all connections existing in the
domain.
Examples
->show enet-connection
Displays all Ethernet connections existing in the domain
->show enet-connection Profile1:*
Displays Ethernet connections of a profile Profile1