HP Virtual Connect 1.10Gb-F Ethernet Module for c-Class BladeSystem - Manual (Page 52)

Command line 52
Item Description
UntaggedD
(optional)
Enable or disable the network to handle untagged packets. Only one network in
an Ethernet network connection can be made to handle untagged packets. The
default value is "false". If a shared uplink set is being used, then the untagged
network is the same as the native network, if present, but any other network can
be configured to handle untagged packets.
Examples
->add server-port-map MyProfile:1 Network1 VLanID=100
Adds a new server port to dedicated network mapping
->add server-port-map MyProfile:2 RedNetwork
Uplinkset=MyUplinkSet1
Adds a new server port to shared network mapping
->add server-port-map MyProfile:3 GreenNetwork
Uplinkset=MyUplinkset1 UnTagged=true
Adds a new server port to shared network and label it as untagged
Item Description
remove server-
port-map
Remove a server port network mapping. This command cannot be used if the
domain setting VLanTagControl is set to "Tunnel".
Syntax remove server-port-map [Network=
Name>]
Parameters
ConnectionID
(required)
The reference ID of an existing enet-connection associated with a profile and a
server port. The format of the ConnectionId is: . "*" will
remove all server-port-map configurations from the domain
Network
(optional)
The name of an Ethernet network to which the mapping exists.
Examples
->remove server-port-map MyProfile:1 RedNetwork
Removes a server port network mapping
->remove server-port-map MyProfile:1 *
Removes all server port network mappings from a profile
->remove server-port-map *
Removes all the server port mappings in the domain
Item Description
set server-port-
map
Modify an existing server port network mapping. This command cannot be used if
the domain setting VLanTagControl is set to "Tunnel" or if the network is associated
with a shared uplink port set.
Syntax set server-port-map [Network=]
[VLanID=] [UnTagged=]
Parameters
ConnectionID
(required)
The reference ID of an existing enet-connection associated with a profile and a
server port. The format of the ConnectionId is .
Network
(required)
The name of a valid Ethernet network to which the mapping exists
Properties