HP Virtual Connect 1.10Gb-F Ethernet Module for c-Class BladeSystem - Manual (Page 18)

Command line 18
Item Description
->import enclosure UserName=Administrator
Password=fgg7h*1 DoubleDense=true
Imports the local enclosure with double-dense device bay display format
Item Description
remove enclosure Remove a remote enclosure that has been imported into the domain. The local
enclosure is not allowed to be removed from the domain using the remove
enclosure command.
Syntax remove enclosure
Parameter
EnclosureID
(Required)
The enclosure ID of the remote enclosure to be removed from the domain,
where "*" removes all the remote enclosures that exist in the domain. The
enclosure IDs can be identified for a particular enclosure by using the show
enclosure command. The local enclosure cannot be removed from the
domain with this command.
Examples
->remove enclosure encl
Removes a remote enclosure
->remove enclosure *
Removes all remote enclosures from the domain
Item Description
show enclosure Display all enclosures in the domain.
Syntax show enclosure [|*]
Parameter
EnclosureID
(optional)
The ID of an enclosure in the domain. If specified, then only details for the
specified enclosure are displayed.
Examples
->show enclosure
Displays a summary listing of all enclosures
->show enclosure *
Displays detailed information for all enclosures
->show enclosure enc0
Displays detailed information for a specific enclosure
->show enclosure encl
Displays detailed information for a single enclosure
enet-connection
Manage Ethernet network connections.
Supported actions: add, help, remove, set, show