HP Designjet 350c Printer - Manual (Page 96)

5–4
Company confidential. Pelican User’s Guide, Ed 1, Final. Freeze Status: frozen
This is the cyan on page 5–4 (seq: 96)
This is the black on page 5–4 (seq: 96)
2
When you have correctly loaded the sheet
(when the
Ready light is on and steady),
press the Setup and Replot keys
simultaneously.
The Black Cartridge Alignment Sheet is
printed. An example is shown on
page 5–5.
Setup + Replot
3 When the Load Media light comes on (not flashing), the plot is finished. Simply
remove the sheet from the plotter.
4 Follow the instructions on the sheet itself. As you will see, this involves you
identifying the straightest set of vertical lines in each of the two boxes.
5 If the straightest sets are already the current selection, you need do nothing more.
If not, then mark the appropriate ovals, reverse the sheet as indicated, and reload it.
6
When the Ready light comes on, press
Setup .
The plotter now reads your marks and
adjusts itself automatically.
Setup
Ready
Special internal plots
Using the Black Cartridge Alignment Sheet
Localization Note. .Treat as new.