HP Designjet 350c Printer - Manual (Page 69)

2–29
Company confidential. Pelican User’s Guide, Ed 1, Final. Freeze Status: frozen
This is the cyan on page 2–29 (seq: 69)
This is the black on page 2–29 (seq: 69)
To cut and unload a plot from a roll
If the roll-feed option is installed, your plotter includes a built-in cutter. You may
choose to cut the roll between plots, or at the end of a series of plots, as explained
here.
There are two alternative plotting modes:
Pause mode. The plotter pauses between plots for you to cut the plot from the
roll (the default mode).
Continuous Plotting mode. The plotter does not pause between plots.
In Continuous Plotting mode, when you are cutting the roll after the last of a
series of plots, another plot sent to the plotter could start printing while you
are cutting. If this is likely, Pause mode, rather than Continuous Plotting
mode, is recommended.
Continue
Plotting
Roll
To switch between the two modes,
press the
Continue Plotting key at any
time, except when it has paused and is
waiting for you to cut a plot from the
roll.
While the plotter is in Continuous
Plotting mode, the
Roll light flashes.
MEDIA
2
Working with media
Unloading media
Localization Note. .Treat as new.
C A U T I O N