HP Designjet 350c Printer - Manual (Page 20)

1–6
Company confidential. Pelican User’s Guide, Ed 1, Final. Freeze Status: frozen
This is the cyan on page 1–6 (seq: 20)
This is the black on page 1–6 (seq: 20)
Task 2: (Optional) Install a memory expansion module
For details of the memory modules available, see page 10–16. You may install
only one.
1 Make sure that the plotter is switched OFF and that neither the power cord
nor an interface cable is connected.
X
X
1736a
2 Unscrew the cover plate at the back of the plotter, and remove it.
1737
Localization Note JKCT: Similar to Parrot UG p1–6.
Setting up your plotter
Task 2: (Optional) Install a memory expansion module