Task 6: (optional) change the language – HP Designjet 350c Printer User Manual
Page 28
1–14
Company confidential. Pelican User’s Guide, Ed 1, Final. Freeze Status: frozen
This is the cyan on page 1–14 (seq: 28)
This is the black on page 1–14 (seq: 28)
Task 6: (Optional) Change the language
All the plotter’s internal plots are available in the following languages: English,
French, Italian, German, Spanish, Portuguese and Japanese. By default, the
language is English. If English is what you want, then you can skip this task and
go to task 7.
To change from English to any of the other languages, you must use the plotter’s
Setup Sheet, as explained below.
1
Load a sheet of A-size or A4-size plain paper, in portrait orientation. For
guidance on loading a sheet, see page 2–9.
When the
Ready
light is on, you have loaded the sheet correctly.
Plot will be on underside.
1750
Localization Note JKCT: Similar to Parrot UG p1–18.
Setting up your plotter
Task 6: (Optional) Change the language