HP Designjet 350c Printer - Manual (Page 120)

This is the yellow on page 7–6 (seq: 120)
This is the magenta on page 7–6 (seq: 120)
7–6
Company confidential. Pelican User’s Guide, Ed 1, Final. Freeze Status: frozen
This is the cyan on page 7–6 (seq: 120)
This is the black on page 7–6 (seq: 120)
3
1 Take the new cartridge out of its box.
2 Remove the colored protective tape and tab
from the cartridge’s nozzles.
3 Make sure that the plotter is still switched ON.
(Never install cartridges with the plotter
switched off.)
4 Insert the new cartridge in the stall. Press down lightly and push the
cartridge away from you until it snaps into place. If it is installed correctly,
the
Ready light flashes for a second or two.
1754
Yellow
Cyan
Magenta
Black
1
2
1
2
330
350C
Match the color of the cartridge’s label with the color of the dot
above the empty stall. For users with color-vision deficiencies:
you can identify the colors of the cartridges by the part numbers on
the boxes – see page 10–17. 350C
0004
r0004
4 When you have finished replacing cartridges, lower the cover.
If you wish, you can now check your cartridge alignment by running the Black
Cartridge Alignment Routine (See page 5–3). However, this is normally only
required for troubleshooting.
Maintaining your plotter
Replacing cartridges
Localization Note. Very similar to Loquillo UG p3-29.