HP Designjet 350c Printer User Manual
Page 64
2–24
Company confidential. Pelican User’s Guide, Ed 1, Final. Freeze Status: frozen
This is the cyan on page 2–24 (seq: 64)
This is the black on page 2–24 (seq: 64)
8
Align the edges of the media coming out of the plotter with the same edges
going into the plotter, by pulling them taut with both hands and aligning them
by eye. Make sure that the right-hand side of the media is aligned with the line
of holes on the plotter (
A
), the top roller (
B
) and the roll (
C
). You may need to
manually unroll a small amount of the media from its roll, to align the sheet
satisfactorily.
9
Raise the green media lever.
Working with media
Loading roll media
Localization Note. .Treat as new.
This manual is related to the following products: