HP Designjet 350c Printer - Manual (Page 90)

4–2
Company confidential. Pelican User’s Guide, Ed 1, Final. Freeze Status: frozen
This is the cyan on page 4–2 (seq: 90)
This is the black on page 4–2 (seq: 90)
To cancel a plot
To cancel the current plot while it is
being received, or while it is printing,
press
Cancel .
The canceled plot stays in memory
until you send another, and so you can
subsequently use
Replot to print it
again. Note that, for these purposes,
any internal plot (see chapter 5) counts
as another plot.
Cancel
To copy a plot
Replot
To print another copy of the last plot,
press
Replot .
It will be printed with the same
settings for
Media Type and Print
Quality as the original copy, even if
you’ve changed them on the front
panel.
Replot does not work if:
another file has already been sent to the plotter (including internal plots, for
example the Setup Sheet), or
you have switched the plotter off and on again since first sending the plot.
Localization Note. Treat as new.
X
Localization Note. Treat as new.
Managing your plots
To copy a plot / To copy a plot