HP Designjet 350c Printer - Manual (Page 59)

2–19
Company confidential. Pelican User’s Guide, Ed 1, Final. Freeze Status: frozen
This is the cyan on page 2–19 (seq: 59)
This is the black on page 2–19 (seq: 59)
3 Remove the old roll by pulling firmly first on the left end of the spindle and
then on the right. You may find that you have to push your thumbs against the
cover of the roll-feed assembly while pulling the roll with your fingers to be
able to release the spindle.
2
If the new roll is on a different spindle, then you can skip steps 4 and 5, and go
straight to step 6.
4
Remove the left media stop, and then remove the roll from the spindle, with
the right media stop still connected to the spindle.
1
2
1922a
Working with media
Loading roll media
MEDIA
2
Localization Note. .Treat as new.