HP Designjet 350c Printer User Manual
Page 109
6–7
Company confidential. Pelican User’s Guide, Ed 1, Final. Freeze Status: frozen
This is the cyan on page 6–7 (seq: 109)
This is the black on page 6–7 (seq: 109)
Before handling a memory module, either put on a grounding wrist strap and
attach the end to the metal chassis of the plotter, or touch the outer metal
surface of the plotter with your hand. Otherwise, static electricity from your
body could damage the memory module.
3
There are two slots for SIMMs in the plotter. The SIMM containing the
upgrade goes in the slot furthest from you. If both slots are free, skip this
step and go straight to step 5. If the slot nearest to you already contains a
SIMM (a memory module), then you must first remove it, in order to
access the other slot.
1
Gently push aside the two clips that hold the memory module in place.
2
Holding it only by the edges, carefully pull the top of the module
toward you and lift it out.
1
2
1738b
1909
Localization Note. .Treat as new.
C A U T I O N
RECONFIG–
6
URA
TION
Reconfiguring your plotter
To upgrade the HP DesignJet 330 with color