beautypg.com

Default boot sequence, Accessing the all-in-one management console, Accessing the all-in-one management – HP StorageWorks 1200r All-in-One Storage System User Manual

Page 23: Console

background image

DON'T ERASE Volume

RAID 5

Physical Drives 1–6

Operating System Volume

RAID 5

Physical Drives 1–6

AiO600

DON'T ERASE Volume

RAID 1

Physical Drives 1–2

Operating System Volume

RAID 1

Physical Drives 1–2

AiO1200r

Default boot sequence

The BIOS supports the following default boot sequence:

1.

DVD-ROM

2.

HDD

3.

PXE (network boot)

Under normal circumstances, the storage system boots up from the OS logical drive.

If the system experiences a drive failure, the drive displays an amber disk failure LED.

If a single drive failure occurs, it is transparent to the OS.

Accessing the All-in-One Management Console

Before accessing the All-in-One Management Console, verify that the storage system is completely
installed in the rack, and that all cables and cords are connected.

To access the All-in-One Management Console, you can use these access methods:

Direct attach

To connect directly to the storage system without using the network.

Remote browser

To establish a browser-based connection to the All-in-One Management
Console from a remote client running Internet Explorer 5.5 (or later).

Remote Desktop

To establish a connection from a remote client without using a browser.
This method requires the client to have Windows Remote Desktop
capability.

Remote management

To establish a browser-based connection from a remote client using the
HP Lights-Out 100 (LO100) or HP Integrated Lights-Out 2 (iLO 2)
interface.

For more information, see “

Planning for installation

” on page 19.

IMPORTANT:

An IP address can be substituted for a storage system's serial number and hyphen when using either remote
browser or Remote Desktop methods to access the All-in-One Management Console. For example: 192.0.0.1
can be substituted for TWT08466-.

HP StorageWorks All-in-One Storage System

23