HP StorageWorks 1200r All-in-One Storage System - Manual (Page 123)

The following table lists all possible ASM alerts and provides descriptions, possible causes, and
solutions for each alert.
Table 49 Alert descriptions
Solution Possible cause Description Alert text Object
Change directory
permissions back to
default permissions set by
ASM. If the logical disk
has failed, see
“
Recovering from logical
disk failure ” on page 130.
Directory permission
is preventing ASM
from determining the
used space or the
logical disk has failed.
An alert will be issued
for the logical disk if it
has failed.
Used space cannot be
determined.
Directory size
cannot be
determined.
Any
application
component,
user-defined
application, or
shared folder
Increase the percent full
warning threshold (see
Setting a percent full
warning
threshold
on page 80) or
increase the allocated
storage (see “
Increasing
or reducing the allocated
storage
” on page 97).If
the logical disk has failed,
see “
Recovering from
logical disk
failure
” on page 130.
The percent of used
space exceeds the
percent full warning
threshold or the
logical disk has failed.
An alert will be issued
for the logical disk if it
has failed.
Used space is about
to surpass the percent
full warning threshold
(X%). Used space
has exceeded
its X% warning
threshold.
Change path to allocated
storage back to path
assigned by ASM.If the
logical disk has failed, see
“
Recovering from logical
disk failure ” on page 130.
Path assigned to
allocated storage has
been changed or the
logical disk has failed.
An alert will be issued
for the logical disk if it
has failed.
Allocated storage
space cannot be
located. Volume is
intact.
Directory path
cannot be
found.
Increase the allocated
space or delete data to
reduce used storage. See
“
Increasing or reducing
the allocated
storage
” on page 97 for
more information.
Used storage has
reached the total
allocated space.
No more data can be
saved to the allocated
storage space. 100
percent of allocated
storage is used.
Storage has
reached its
allocated
space.
Reinstall the product using
the supported Data
Protector Express version
located at
C:\hpnas\components\DPX
.
After reinstalling, run the
AddAsmBackupUser.cmd
file from the same
location.
Data Protector Express
has been uninstalled
or upgraded to an
unsupported version.
A supported version
of the integrated Data
Protector Express
software was not
found.
Backup
capability is
not usable.
HP StorageWorks All-in-One Storage System 123