HP ProLiant Support Pack - Manual (Page 71)

Scripted deployment 71
Parameter Description Possible values
when a component has a failed dependency.
The default of OmitHost causes the host to be put
in a failure state and no install is attempted on it.
OmitComponent deselects the affected
components and proceeds with any updates that
do not have dependency failures. Force attempts
all updates, even if they have dependency
failures. OmitComponent, Force
HOST This argument is the IP address or the DNS name
of a remote server, remote iLO NIC port, Virtual
Connect Ethernet or Fibre Channel Module for c-
Class BladeSystem, or BladeSystem Onboard
Administrator.
When two Onboard Administrators are in an
enclosure, this argument should be the active
Onboard Administrator. When specifying the IP
address, you can use either the IPv4 or IPv6
format.
This argument specifies an already defined
group name in the HP SUM GUI. IP address, DNS name
UID This argument enables you to log in to the target
hosts with your user ID.
PWD This argument enables you to use the password
for the user ID specified in the UID.
The password is used to log in to target hosts.
Examples of the HP SUM input file include:
REBOOTALLOWED = YES
REBOOTREQUIRED = NO
REBOOTMESSAGE = "Server is going down for a reboot"
REBOOTDELAY = 15
COMPONENTSLIST = cp001234.exe, cp001235.exe
BUNDLESLIST = bp001234.xml
ALLOWUPDATEBUNDLE = YES
SKIPTARGET = NO
IGNOREERRORS = ServerNotFound, FailedDependencies
SOURCEPATH = c:\pkgsource1
USELATEST = YES
SILENT = YES
OPTIONS = /f:rom
[TARGETS]
HOST = schinta1