HP ProLiant Support Pack - Manual (Page 42)

HP SUM User Interface 42
NOTE: Local hosts cannot be included in a list with remote hosts or in a group. When
selecting an iLO or iLO2 as a host, only the iLO firmware can be updated. The server host
must also be selected to update all other firmware and software components on the same
physical server. The iLO firmware can be updated by either selecting the iLO or the server
host.
To add hosts, see "Managing hosts." To add groups, see "Managing groups (on page 46 )."
To continue with the deployment process:
1. Select one or more hosts or groups.
2. To continue, click Next.
3. Enter the credentials for the host.
4. Click OK to proceed, as described in Selecting components to install on multiple hosts.
5. When the installation is complete, the Installations results for multiple hosts screen appears.
Managing hosts
To add, edit, or delete hosts, click Manage Hosts. The Manage Hosts screen appears. A remote host can
be the IP address or DNS name of the following:
• Remote server
• Remote iLO NIC port
• Virtual Connect Ethernet or Fibre Channel Module for c-Class BladeSystem
• BladeSystem Onboard Administrator