HP ProLiant Support Pack - Manual (Page 32)

HP SUM User Interface 32
Icon Text Description
x Critical
Action X components are not ready for installation due to failed dependencies, where x
is the number of components. The installation cannot proceed until the
dependencies are met or the component is deselected for installation.
Reboot section
The reboot section of the Select Items to be Installed screen enables you to specify preferred reboot
behavior.
To instruct the system to reboot after updates are installed:
1. Click Reboot System After Installation.
2. Click Always or If Needed.
If Always is selected, then the system will always be rebooted unless there is a component installation
failure. If If Needed is selected, then the system will be rebooted if needed by at least one component
unless there is a component installation failure.
To change the delay before reboot or the reboot message, click Reboot Options. The Set Reboot Options
screen appears.
NOTE: In Linux, the Reboot Delay time is automatically converted from seconds to minutes.
Any value under a full minute, 59 seconds or less, will be rounded to the next minute for
Linux.
Make any changes, and click OK.