HP ProLiant Support Pack - Manual (Page 29)

HP SUM User Interface 29
The following image illustrates the HP SUM Select Items to be Installed screen when installing Linux RPMs.
The Select Items to be Installed screen includes the following sections:
• Host—Lists the system on which the selected items are installed.
• Status—Indicates if the installation is ready.
• Reboot section—Enables you to specify reboot settings and determine when reboots occur.
• Component selection pane—Enables you to specify which components to install.
When updating installation for some but not all NIC components, select the devices to be updated in the
window that appears. If the NIC firmware listed for the device does not have a version, you cannot add
that firmware to the device using HP SUM.
When multiple hardware devices such as hard drives or array controllers exist in a single server, HP SUM
lists each device only one time. If the devices have different firmware versions, then the versions are listed
from earliest to latest in a range. When multiple instances of the firmware are available for installation,
the instances are listed from latest to earliest. If necessary, all hardware device firmware is flashed to the
selected version.
The Select Items to be Installed screen also includes the following buttons:
• Select All—Selects all available components for installation.
• Deselect All—Clears all components selected for installation.