HP ProLiant Support Pack - Manual (Page 40)

HP SUM User Interface 40
NOTE: Some of the Linux RPMs require the target server to be rebooted after the RPM is
installed. However, the Reboot Needed message does not appear on the Installation
Results screen for Linux RPMs since that information is not available to HP SUM. HP
recommends that you reboot the target server after installation of any Linux RPMs. To view the
list of RPMs which require a reboot, see the download page of the HP ProLiant Support Pack
for Linux on the PSP website (
http://www.hp.com/servers/psp ).
To view the installation result details, click View Installation Log.
The Installation Results screen also includes the following buttons:
• Reboot Now—Reboots the server. (This button is available for local installations only.)
• Exit—Exits HP SUM.
NOTE: After updating hard drives in external enclosures such as MSA20, you must power
cycle the external enclosures. The Reboot button in HP Smart Update Manager only reboots
the server but never power cycles an external enclosure.
The following installation logs contain information about the installation activity for each host being
updated:
• hpsum_log.txt log—Contains a brief summary of the installation activity