HP ProLiant Support Pack - Manual (Page 24)

HP SUM User Interface 24
Download Permission
Before starting any discovery, HP SUM searches the web digest for self-discovery components that must
be downloaded for the discovery process. Self-discovered components are components including but not
limited to NIC firmware and tape firmware that HP SUM uses to discover the hardware in the system. If
the Check.ftp.hp.com checkbox has been selected on the previous screen, then the Download Permission
screen might appear if there are self-discovery components that are available for download.
The Download Permission screen lists the available self-discovery components found on the HP FTP site.
You can select or clear the updates you are downloading. The Download Permission screen includes the
following buttons:
• Select All—Selects all available components for download.
• Clear All—Clears all components selected for download.
• Cancel—Exits the Download Permission screen and returns to the Source Selections screen.
• OK—Downloads all selected components.
NOTE: Emulex HBAs, Qlogic HBAs, Brocade HBAs, and offline-only components cannot be
retrieved from the HP website and can only be installed offline. These components do not
appear on the web components list.
For more information on selecting the location for updates, see "Selecting the location to check for
updates (on page
22 )".