ADTRAN 1200130L2 - Manual (Page 93)

61200.130L1-1 FSU User Manual 7 9
Chapter 8. IP Routing
IP Route Table
Use these menu options to build a table of addresses for routing
data packets based on their IP address. When a packet with the
specified IP address is received, it is sent out through the se-
lected port on the specified DLCI. See Figure 8-2.
The IP route table can be used in conjunction with RIP protocol
to provide routing paths for the entire IP network. If an IP
packet is received with a destination IP not located in the inter-
nal routing table (static or RIP), then the gateway route is used.
Figure 8-2
IP Routing Table Menu