ADTRAN 1200130L2 - Manual (Page 47)

61200.130L1-1 FSU User Manual 3 3
Chapter 5. Configuration Overview
Chapter 5
Configuration Overview
LOCAL AND REMOTE CONFIGURATION
The FSU can be configured locally or, when using the VT 100
interface, communications can be established so a local FSU can
configure a remote FSU. See the chapter Operation for informa-
tion on selecting Local or Remote operation.
The Configuration menu (Figure 5-1) consists of submenus
relating to specific interfaces or functions of the FSU requiring
setup:
DTE Port 1
DTE Port 2
Network Port
Control (front panel only)
IP Routing
System Configuration
Configure the Network Port before the DTE Ports. Selections made will
affect the choices available for the DTE ports.
When configuring DTE port 1 or 2, select the Protocol first. This
selection determines which parameters will be available for the Physical
Layer Options, Protocol Options, and Protocol Address Table.