ADTRAN 1200130L2 User Manual
Page 86
7 2
FSU User Manual
61200.130L1-1
Chapter 7. Configuring the Network Port
Clock Source
Configure the FSU clocking source as either the master or slave
(usually slave).
The following physical layer option is available when the
selected interface type is V.35 or RS232:
Bit Rate
Select the bit rate that closely matches the clock rate supplied by
the external DSU. The choices are 56k and 64k when RS232
interface type is selected. Additional choices of 112k, 128k, 168k,
192k, 224k, 256k, 280k, 320k, 384k, 448k, and 512k are available
when the V.35 interface is selected.
Frame Relay Options (FR OPT)
The VT 100 screen in Figure 7-3 appears when Frame Relay
Options is selected from the Network Port Configuration Menu.
Figure 7-3
VT 100 Network Port Frame Relay Options Menu