ADTRAN 1200130L2 - Manual (Page 74)

6 0 FSU User Manual 61200.130L1-1
Chapter 6. DTE Port Configuration
1 PROTOCOL 7 PPP SYNCHRONOUS
1 DTE PORT 1 2 PHYSICAL LAYER OPTIONS 1 INTERFACE TYPE 1 RS232
2 V.35
1 2400 bps
2 DTE PORT 2 2 4800 bps
3 9600 bps
2 SYNCHRONOUS BIT RATE 4 19.2 Kbps
5 38.4 Kbps
6 56 Kbps
7 64 Kbps
8 112 Kbps
9 128 Kbps
10 168 Kbps
11 192 Kbps
12 224 Kbps
13 256 Kbps
14 280 Kbps
15 320Kbps
16 384 Kbps
17 448 Kbps
18 512 Kbps
3 SYNCHRONOUS IDLE METHOD 1 TRANSMIT FLAGS
2 TRANSMIT ALL ONES
4 HARDWARE FLOW CONTROL 1 OFF
2 ON
3 PROTOCOL OPTIONS N/A
1 IP ADDRESS
4 PROTOCOL ADDRESS TABLE 2 SUBNET MASK
3 PEER IP ADDRESS
4 TRANSMIT RIP REQUESTS
1 NO
5 REPLY TO RIP REQUESTS 2 YES
Figure 6-9
PPP Synchronous Protocol Menu Tree
Physical Layer Options
Interface Type (CONN)
Select the connector type for the DTE interface. The choices are
V.35 and RS-232.