HP XP External Storage Software User Manual
Page 20
Storage arrays that can be connected as external arrays
lists storage arrays that can be connected as external arrays. Notes about the appearance
of each storage array in this document and in External Storage XP panes are also listed.
Table 2 Storage arrays that can be connected as external arrays
Notes
Storage array
HP StorageWorks XP12000 Disk
Array
•
In External Storage XP panes, the array appears as “12000”.
•
Alternate paths are in Multi mode (meaning that dynamic load
balancing across multiple active paths is enabled).
HP StorageWorks XP10000 Disk
Array
•
In External Storage XP panes, the array appears as “10000”.
•
Alternate paths are in Multi mode.
HP StorageWorks XP1024/XP128
Disk Array
•
In External Storage XP panes, the arrays appear as “1024” and
“128”, respectively.
•
Alternate paths are in Multi mode.
HP StorageWorks XP512/XP48 Disk
Array
•
In External Storage XP panes, the arrays appear as “512” and “48”,
respectively.
•
Alternate paths are in Multi mode.
HP StorageWorks XP256 Disk Array
•
In External Storage XP panes, the array appears as “256”.
•
Alternate paths are in Multi mode.
HP StorageWorks 200 Storage
Virtualization System
•
In External Storage XP panes, the array appears as “SVS200”.
•
Alternate paths are in Multi mode.
HP StorageWorks 3000/5000
Enterprise Virtual Array
•
In this user guide, the arrays appear as “EVA array”.
•
In External Storage XP panes, the arrays appear as “EVA”.
(Active/Standby and Active/Active
•
Alternate paths are in Single mode (meaning that dynamic load
balancing across multiple active paths is not enabled).
controllers) or HP StorageWorks
4000/6000/8000 Enterprise
Virtual Array (Active/Active
controllers)
HP StorageWorks MSA1000/1500
(Active/Standby)
•
In this user guide, the arrays appear as “MSA array”.
•
In External Storage XP panes, the arrays appear as “MSA”.
•
Alternate paths are in Single mode.
TagmaStore™ Universal Storage
Platform subsystem
•
In this user guide, the array appears as “TagmaStore™ USP
subsystem”.
•
In External Storage XP panes, the array appears as “USP”.
•
Alternate paths are in Multi mode.
TagmaStore™ Network Storage
Controller subsystem
•
In this user guide, the array appears as “TagmaStore™ NSC
subsystem”.
•
In External Storage XP panes, the array appears as “NSC”.
•
Alternate paths are in Multi mode.
TagmaStore™ Adaptable Modular
Storage subsystem
•
In this user guide, the array appears as “TagmaStore™ AMS
subsystem”.
Preparing for External Storage XP operations
20