HP XP External Storage Software - Manual (Page 174)

Examples of recovery
procedures Path status
Check the LU paths' settings. If the
LU paths' settings changed, change
the settings back to the ones used
when the volume was mapped. Or
use External Storage XP to perform
the Delete LU operation, and
perform the Add LU operation
again.
LUN Security XP Extension may
have changed the volume's access
attribute.
Check the volume's access
attribute. If the volume is protected
by the access attribute, release the
protection.
The volume may have been set as
a pair volume for data copy. Illegal request
Check if the volume is set as a pair
volume for Business Copy XP,
Continuous Access XP, Continuous
Access XP Journal, or another copy
program. If the volume is set as a
pair volume, the volume might be
protected because of the pair
status. If the volume is protected,
change the pair status or delete the
pair.
LUN Security XP Extension may
have changed the volume's access
attribute.
Check the volume's access
attribute. If the volume is protected
by the access attribute, release the
protection.
The volume may have been set as
a pair volume for data copy. Response error
Check if the volume is set as a pair
volume for Business Copy XP,
Continuous Access XP, Continuous
Access XP Journal, or another copy
program. If the volume is set as a
pair volume, the volume might be
protected because of the pair
status. If the volume is protected,
change the pair status or delete the
pair.
LUN Security XP Extension may
have changed the volume's access
attribute.
Notes on connecting external arrays 174