HP XP External Storage Software - Manual (Page 114)

Figure 54 Add Paths window
• Port
Local array ports. After selecting a port, you can add paths. One of the following icons appears
for each port:
Port in Standard mode.
Port in Initiator/External MIX mode.
• Selected Paths
Paths that are added as ports that configure alternate paths. WWNs identify ports on the external
array. Nothing is displayed when you initially access the Add Paths window.
• Unselected Paths
External array ports (WWNs) that can configure the path connecting with the local array port
selected in the Port list. Select WWNs from this list to add as alternate paths.
• Set
Moves WWNs selected in Unselected Paths to Selected Paths.
• Release
Moves WWNs selected in Selected Paths to Unselected Paths.
• OK
Saves settings in the Add Paths window, closes the Add Paths window, and displays the Path
Setting window.
• Cancel
Cancels all settings in the Add Paths window, and closes the window.
To add alternate paths to multiple external LUs at one time:
1. Select the LU Operation tab. The LU Operation pane appears.
2. In the Device tree, select an external LU group number. Information about external LUs mapped
as internal LDEVs appears in the Device list.
3. In the Device list, select multiple external LUs, right-click, and select Add Paths. The Add Paths
window appears.
4. In the Port list, select the local array port. External array ports (WWNs) that can configure the
path connecting with the selected local array port appear in Unselected Paths.
Configuring external LUs 114