AltiGen comm ACM 5.1 - Manual (Page 402)

388 AltiWare ACM 5.1 Administration Manual
CT-Bus Test Tool
The CT-Bus Test Tool is a tool that detects one-way connection, cross talk, bad MVIP
cable and static noise problems.
To run the CT-Bus Test Tool:
1. Stop AltiGen Switching Services before running this utility.
2. Launch CT-Bus Test Tool from Start > All Programs > AltiWare ACC/ACM >
Gateway Tools > CT-Bus Test Tool.
3. Click Start to begin the test.
4. At the end of the test, the utility provides pass or fail results.
Backup and Restore Utility
To back up or restore data, select either
•
From AltiWare Administrator: Services > Utilities > System Data Management,
or
•
From the Windows Start menu: All Programs > AltiWare ACC/ACM > Utilities
> ACC/ACM Backup and Restore.
Figure 1. System Data Management window
Note: The System Data Management window can only be accessed at the primary
AltiWare system; it is not available from a remote AltiWare Administrator client.