AltiGen comm ACM 5.1 - Manual (Page 121)

Chapter 2: Multilingual Configuration
AltiWare ACM 5.1 Administration Manual 13
Configuring the Extension
Extension users have a default language configured, and that language is always used
for them whenever they hear a prompt on their extension. The default language is
assigned in Extension Configuration > General tab.
Figure 3. Selecting a language for an extension user
In the Language drop-down list, select the desired language, and click OK.
Extension User Can Change Language Setting
Extension users can change the extension’s language setting by using feature code #12,
if feature code #12 is configured on the System > Multilingual Configuration >
Feature Code tab:
Figure 4. Configuring feature code #12 to enable a user to change an extension’s language
selection
Select a language
for the extension
user