Avaya Stackable Switch P3343T-ML - Manual (Page 60)

Chapter 8 User Authentication
44 Avaya P334T-ML User’s Guide
Return the SNMPv3 engine ID to its
default no snmp-server engineID
Create an SNMPv3 user snmp-server user
Remove an SNMPv3 user no snmp-server user
Create an SNMPv3 group snmp-server group
Remove an SNMPv3 group no snmp-server group
Create a view or add or exclude
OIDs from a view snmp-server view
Delete an SNMPv3 view no snmp-server view
Set a read/write/trap SNMPv1
community name set snmp community
Display a list of SNMPv3 views show snmp view
Display a table of SNMPv3 users
and the groups with which they are
mapped show snmp userToGroup
Display the SNMPv3 engine ID show snmp engineID
Display a list of SNMPv3 groups show snmp group
Display a list of SNMPv3 users show snmp user
Display a list of SNMPv3
notification receivers and SNMPv1
trap receivers show snmp
Enable or disable link up/link
down notifications and traps set port trap
Define SNMPv1 trap receivers or
configure the SNMPv1 traps sent
by the device set snmp trap
Removes SNMPv1 trap receivers clear snmp trap
Enable or disable SNMPv1 traps for
authentication failures set snmp trap enable/disable auth
In order to... Use the following command...