Avaya Stackable Switch P3343T-ML - Manual (Page 107)

Chapter 11 Avaya P330 Layer 2 Features
Avaya P334T-ML User’s Guide 91
Globally enable/disable 802.1x set dot1x system-auth-control
enable/disable
Set dot1x control parameter per
port set port dot1x port-control
Initialize port dot1x set port dot1x initialize
Set the port to re-authenticate set port dot1x re-authenticate
Set dot1x re-authentication mode
per port set port dot1x re-authentication
Set the 802.1x quiet period per port set port dot1x quiet-period
Set the transmit period per port (a
time interval between attempts to
access the Authenticated Station) set port dot1x tx-period
Set the supp-timeout per port (a
time for the port to wait for a reply
from the Authenticated Station) set port dot1x supp-timeout
Set the server-timeout per port (a
time to wait for a reply from the
Authentication Server) set port dot1x server-timeout
Set the re-authentication period per
port (an idle time between re-
authentication attempts) set port dot1x re-authperiod
Set the max-req per port (the
maximal number of times the port
tries to retransmit requests to the
Authenticated Station before the
session is terminated) set port dot1x max-req
In order to... Use the following command...