Avaya 1165E User Manual
Page 95

Configuring Local Menu options
95
Figure 20: Headset menu item display
To enable a USB headset
Making a change in the
Headset
menu page takes effect immediately.
Note: Press the
Apply
button to make the changes permanent.
Press
Exit
to discard any changes.
1.
Select USB from the
Active Headset Device
list.
2.
Select the
Enable HID Commands
check box to provide full HID for
supported headsets.
Note: The following two steps applies only if the Avaya Headset
Adapter is connected. You can select the Headset Type only for the
Avaya USB Headset Adapters. If the Avaya USB Headset Adapter is
not detected, the Headset Type selection is disabled, and cannot be
modified.
3.
Select the Headset type from the following list of headsets:
•
DuraPlus-B (GN Netcom DuraPlus Binaural Headset)
•
DuraPlus-M (GN Netcom DuraPlus Monaural Headset)
•
GN2020 (GN Netcom GN2020 NC Monaural Headset)