Avaya P333T - Manual (Page 147)

Chapter 6 CLI – Layer 2
Avaya P333T User’s Guide 131
The syntax for this command is:
copy tftp module-config
Example:
P330-N# copy tftp module-config c:\config\switch1.cfg
192.168.49.10 5
copy tftp EW_archive
Use the copy tftp EW_archive command to download the P330 Device
Manager application into the switch via TFTP. To use this command, you need to
have an active TFTP server, and to create a file into which to download the data. If
Avaya Multi-Service Network Manager is running, an additional TFTP server is not
required.
The syntax for this command is:
copy tftp EW_archive
Example:
P330-N# copy tftp EW_archive c:\p330\p330web201
192.168.49.10 5
copy tftp SW_image
Use the copy tftp SW_image command to update the software image and the
device manager applications of a designated switch. To use this command, you
need to have an active TFTP server, and to create a file into which to download the
data. If Avaya Multi-Service Network Manager is running, an additional tftp server
is not required.
The syntax for this command is:
copy tftp SW_image EW_archive <filename>
filename The file name (full path)
ip The ip address of the TFTP server
filename Embedded Web Manager image file name (full path)
ip The ip address of the TFTP server
mod_num Target switch number