Avaya P333T - Manual (Page 144)

Chapter 6 CLI – Layer 2
128 Avaya P333T User’s Guide
alarm 1026 was created successfully
rmon event
Use the rmon event command to create an RMON event entry.
The syntax for this command is:
rmon event description
owner
Output Example:
P330-N# rmon event 1054 logAndTrap description "event for
monitoring amir's computer" owner amir
event 1054 was created successfully
copy stack-config tftp
Use the copy stack-config tftp command to upload the stack-level
parameters from the current NVRAM running configuration into a file via TFTP.
Note: Create the file into which you wish to upload the stack-level parameters prior
to executing this command.
The syntax for this command is:
copy stack-config tftp
Output Example:
P330-N# copy stack-config tftp c:\conf.cfg 192.168.49.10
Beginning upload operation ...
event number This is the event index number of this entry.
type The type of the event. The possible parameters are:
trap, log, logAndTrap, none.
description A user description of this event
owner Owner name string
filename The file name (full path)
ip The IP address of the TFTP server