Canon PowerShot S110 - Manual (Page 68)

68
Connecting to a Computer
7
Choose a computer to connect
to.
z z Choose the computer to connect to,
following steps 7 – 8 on = 65. The
computer is now added to the list.
• Up to 16 access points will be displayed. If no access points are detected,
choose [Manual Settings] in step 4 to manually set an access point.
Follow on-screen instructions and enter an SSID, security settings, and an
encryption key.
• [***] is displayed for the encryption key in step 5 when the same access
point is used to connect to another device. To use the same encryption key,
choose [Next] (either press the < q> buttons or turn the <7> dial) and
press the < m> button.
• To add multiple computers, repeat the above procedures starting from step 1.
• You can also configure this setting through touch-screen operations
(
= 91).
COP
Y