Canon PowerShot S110 - Manual (Page 66)

66
Connecting to a Computer
z z Double click the connected camera icon.
X X Driver installation will begin.
X X After driver installation is complete, and
the camera and computer connection
is enabled, the AutoPlay screen will be
displayed. Nothing will be displayed on
the camera screen.
z z Proceed to “Using CameraWindow
to Transfer Images to a Computer”
(
= 69).
• If you chose [PIN Method] in step 5, a PIN code will be displayed on the
screen. Be sure to set this code in the access point. Choose a device in the
[Select a Device] screen. For further details, refer to the user guide included
with your access point.
• To add multiple computers, repeat the above procedures starting from step 1.
• When finished adding computers, press the < n> button on the image
transmission screen displayed after you connect to a computer in step 7.
Choose [OK] after the confirmation message, and then press the < m>
button.
• You can also configure this setting through touch-screen operations
(
= 91).
COP
Y