Cop y – Canon PowerShot S110 User Manual
Page 190
190
Shooting Range and Focusing
Still Images
Choosing a Person to Focus On (Face Select)
You can shoot after choosing a specific person’s face to focus on.
1
Prepare the camera for Face
Select.
z
z
Set the AF frame to [Face AiAF] (
z
z
Assign [ ] to the <
> button (
2
Enter Face Select mode.
z
z
Aim the camera at the person’s face and
press the <
> button.
X
X
After [Face Select : On] is displayed, a
face frame [ ] is displayed around the
face detected as the main subject.
z
z
Even if the subject moves, the face frame
[ ] follows the subject within a certain
range.
3
Choose the face to focus on.
z
z
To switch the face frame [ ] to another
detected face, press the <
> button.
z
z
After you have switched the face frame
to all detected faces, [Face Select : Off]
is displayed, and the specified AF frame
mode screen is displayed again.
4
Shoot.
z
z
Press the shutter button halfway. After the
camera focuses, [ ] changes to [ ].
z
z
Press the shutter button all the way down
to shoot.
•
When [Face ID] is set to [On], names of any registered people detected are
not displayed when you have selected another, unregistered face to focus
on. However, their names will be recorded in the still images (
COP
Y