Cop y – Canon PowerShot S110 User Manual
Page 237
237
Protecting Images
•
Protected images on a memory card will be erased if you format
the card (
•
Protected images cannot be erased using the camera’s erasure function. To
erase them this way, first cancel protection.
Choosing Images Individually
1
Choose [Select].
z
z
= 236, choose
[Select] and press the <
m> button.
2
Choose an image.
z
z
Press the <
q>
<
7> dial to choose an image, and then
press the <
m> button. [ ] is displayed.
z
z
To cancel selection, press the <
m>
button again. [ ] is no longer displayed.
z
z
Repeat this process to specify other
images.
3
Protect the image.
z
z
Press the <
n> button. A
confirmation message is displayed.
z
z
Press the <
q>
<
7> dial to choose [OK], and then press
the <
m> button.
•
Images will not be protected if you switch to Shooting mode or turn
the camera off before finishing the setup process in step 3.
•
You can also select or clear images by touching the screen in step 2, and
you can access the confirmation screen by touching [
].
•
You can also protect images by touching [OK] on the screen in step 3.
COP
Y