Canon PowerShot S110 - Manual (Page 185)

185
Shooting Range and Focusing
Still Images Movies
1-point
One AF frame is displayed. Effective for reliable focusing.
• A yellow AF frame is displayed with [ ] if the camera cannot
focus when you press the shutter button halfway. Note that AF-
point zooming ( = 130) is not possible.
• To compose shots so that subjects are positioned at the edge or in a corner,
first aim the camera to capture the subject in an AF frame, and then hold
the shutter button halfway down. As you continue to hold the shutter button
halfway, recompose the shot as desired, and then press the shutter button all
the way down (Focus Lock).
Still Images
Moving and Resizing AF Frames (1-point)
When you want to change the position or size of the AF frame, set the AF
frame mode to [1-point].
1
Move the AF frame.
z z Touch the screen. An AF frame is
displayed in orange where you touched
(Touch AF).
z z You can turn the < 7> dial to move the AF
frame and press the < o>
buttons to fine-tune the position.
z z To return the AF frame to the original
position in the center, press the < n>
button.
2
Resize the AF frame.
z z To reduce the AF frame size, turn the
< y> ring. Turn it again to restore it to the
original size.
3
Finish the setup process.
z z Press the < m> button.
COP
Y