Canon PowerShot S110 - Manual (Page 300)

300
Still Images Movies
Using an Eye-Fi Card
Before using an Eye-Fi card, always confirm that local use is permitted
(
= 2).
Inserting a prepared Eye-Fi card enables automatic wireless transfer of
images to a computer or uploading to a photo-sharing website.
Images are transferred by the Eye-Fi card. Refer to the card’s user manual
or contact the manufacturer for instructions on preparing and using cards or
resolving transfer problems.
• When using an Eye-Fi card, keep the following points in mind.
- Cards may continue to transmit radio waves even when [Eye-
Fi trans.] is set to [Disable] ( = 301). Remove the Eye-Fi
card before entering hospitals, aircraft, or other areas where
transmission is prohibited.
- When troubleshooting image transfer issues, check the card and
computer settings. For details, refer to the card’s user manual.
- Poor Eye-Fi connections may cause image transfer to take a long
time, and transfer may be interrupted in some cases.
- Eye-Fi cards may become hot, due to their transfer functions.
- Battery power will be consumed faster than in normal use.
- Camera operation may become sluggish. To resolve this, try
setting [Eye-Fi trans.] to [Disable].
- Eye-Fi transmission is not possible when the camera is
connected to a wireless LAN.
Connection status of Eye-Fi cards in the camera can be checked on the
shooting screen (in regular information display mode) or playback screen (in
simple information display mode).
(Gray) Not connected Interrupted
(Blinking white) Connecting Not communicating
(White) Connected
Error acquiring
Eye-Fi card information
*2
(Animated)
Transfer in
progress *1
*1 Power saving ( = 86) on the camera is temporarily disabled during image transfer.
*2 Restart the camera. Repeated display of this icon may indicate a problem with the
card.
COP
Y