Cop y, Continuous shooting scenes – Canon PowerShot S110 User Manual
Page 102
102
Shooting (Smart Auto)
•
When the drive mode is set to [
] (
= 179), and when [Hg Lamp Corr.] is set to
[On] and scenes are automatically corrected (
= 126), Smiling, Sleeping, Babies
(Smiling), Babies (Sleeping), and Children icons will not be displayed.
•
If the flash is set to [
], the Backlit icons for Smiling and Children will not be
displayed.
•
Babies, Babies (Smiling), Babies (Sleeping), and Children icons will be displayed
when [Face ID] is set to [On], and the face of a registered baby (under two years old)
or child (from two to twelve years old) is detected (
= 113). Confirm beforehand that
the date and time are correct (
•
Try shooting in <
G> mode (= 165) if the scene icon does not
match actual shooting conditions, or if it is not possible to shoot
with your expected effect, color, or brightness.
Continuous Shooting Scenes
If you shoot a still image when the following icons are displayed, the camera
will shoot continuously. If you press the shutter button halfway when one of
the icons in the table below is displayed, one of the following icons will be
displayed to inform you that the camera will shoot continuous images: [ ],
[ ], or [
W].
Smiling (including Babies)
: Consecutive images are captured, and the camera
analyzes details such as facial expressions to save
the image determined to be the best.
Sleeping (including Babies)
: Beautiful shots of sleeping faces, created by
combining consecutive shots to reduce camera
shake and image noise. The AF assist beam will not
light up, the flash will not fire, and the shutter sound
will not be played.
Children
W
: So you don’t miss a photo opportunity of children
who move around, the camera will capture three
consecutive images for each shot.
•
In some scenes, expected images may not be saved, and images
may not look as expected.
•
Focus, image brightness, and color are determined by the first shot.
•
When you want to shoot single images only, press the <
m> button, choose
[
] in the menu, and then choose [
].
COP
Y