Customization for shooting styles, Ring, Adjusting the flash output – Canon PowerShot S120 User Manual
Page 96: Changing control ring settings
96
1
2
3
4
5
6
7
8
9
10
Cover
Before Use
Common Camera
Operations
Advanced Guide
Camera Basics
Auto Mode /
Hybrid Auto Mode
Other Shooting
Modes
Tv, Av, M, and
C Mode
Playback Mode
Wi-Fi Functions
Setting Menu
Accessories
Appendix
Index
Basic Guide
P Mode
Still Images
Adjusting the Flash Output
Choose from the three flash levels in [
D] mode.
1
Raise the flash.
z
z
Move the <
h> switch.
2
Enter [
D] mode.
z
z
Set the mode dial to [
D].
3
Configure the setting.
z
z
Press the <
r> button and immediately
turn the <
y> ring to choose the flash
level, and then press the <
m> button.
z
z
Once the setting is complete, the flash
output level is displayed.
[
]: low, [
]: medium, [
]: high
•
You can also set the flash level by accessing MENU (
[
4] tab ► [Flash Settings] ► [Flash Output].
•
You can set the flash level in [
M] or [B] mode by accessing MENU
(
4] tab ► [Flash Settings] ► [Flash Mode] ►
[Manual].
•
You can also access the [Flash Settings] MENU screen by pressing the <
r>
button and then the <
n> button.
•
You can also access the [Flash Settings] MENU screen by pressing the <
r>
button and touching [
].
Customization for Shooting Styles
Still Images
Movies
Changing Control Ring Settings
Reassign control ring functions as follows. Using the control ring is an
enjoyable way to control the camera as you would a fully manual camera.
1
Choose a function to assign to
the <
y> ring.
z
z
Press the <
> button.
z
z
Choose an option, either by pressing the
<
> or <
q>
the <
y> ring or <7> dial.
z
z
Press the <
m> button to complete the
setting.
2
Configure the assigned
function.
z
z
Turn the <
y> ring or the <7> dial to
configure the assigned function.
•
You can also configure this setting by pressing the <
> button, touching an
option to choose it, and then touching it again.