Shooting with the fe lock, Changing the flash timing – Canon PowerShot S120 User Manual
Page 89
89
1
2
3
4
5
6
7
8
9
10
Cover
Before Use
Common Camera
Operations
Advanced Guide
Camera Basics
Auto Mode /
Hybrid Auto Mode
Other Shooting
Modes
Tv, Av, M, and
C Mode
Playback Mode
Wi-Fi Functions
Setting Menu
Accessories
Appendix
Index
Basic Guide
P Mode
Still Images
Shooting with the FE Lock
Just as with the AE lock (
), you can lock the exposure for the flash
shots.
1
Raise the flash and set it to [h]
(
).
2
Lock the flash exposure.
z
z
Aim the camera at the subject to shoot
with the exposure locked. With the
shutter button pressed halfway, press the
<
o> button.
z
z
The flash fires, and when
[
] is displayed, the flash output level is
retained.
z
z
To unlock FE, release the shutter button
and press the <
o> button again. In this
case, [
] is no longer displayed.
3
Compose the shot and shoot.
z
z
After one shot, FE is unlocked and [
] is
no longer displayed.
•
FE Lock cannot be used with Touch Shutter (
) or Touch AF
), because touching the screen will cancel FE Lock.
•
FE: Flash Exposure
Still Images
Changing the Flash Timing
Change the timing of the flash and shutter release as follows.
1
Access the setting screen.
z
z
Press the <
n> button, choose [Flash
Settings] on the [
4] tab, and then press
the <
m> button (
2
Configure the setting.
z
z
Choose [Shutter Sync.], and then choose
the desired option (
).
1st-curtain
The flash fires immediately after the shutter opens.
2nd-curtain
The flash fires immediately before the shutter closes.