beautypg.com

Launching the viewer, Shutting down the viewer, Connecting from admin tools – Canon VB-M700F User Manual

Page 98: Launching the viewer -4, Shutting down the viewer -4, Connecting from admin tools -4

background image

7

-4

Launching the Viewer

Viewer operations can be performed via a web browser.

First, access the top page of the camera.

Refer to “User Authentication” in “Chapter 4 Top Page

of the Camera” (P. 4-3) for information on the user

name and password.

The viewer is launched.

Shutting Down the Viewer

Close the web browser in the viewer to shut down.

Connecting from Admin Tools

Only the administrator can connect to this viewer.

(Refer to “Launching the Admin Tools(P. 6-3) for

information on launching the Admin Tools.)

Launching the Viewer

Important

• The Canon Inc. Certificate must be registered on a PC that is

using the Admin Viewer. Refer to “Certificate Registration” in
“Chapter 4 Top Page of the Camera” (P. 4-4) to register the
certificate included in the Setup CD-ROM.

• This Operation Guide explains relevant operations based on

the IP address “192.168.100.1” (factory default setting). You
must enter the actual IP address set for the camera when
following instructions.

1

Access “http://192.168.100.1/” via the web browser.

2

Click [Admin Viewer] or [VB Viewer] according to the

user.

3

For [Admin Viewer], enter the user name and
password.

1

Launch Admin Tools.

2

Click [Admin Viewer].

This manual is related to the following products: