Canon VB-M700F - Manual (Page 57)

[Video] Setting Image Size, Quality and Frame Rate
5
-13
5
S
etting Page
On-screen display
1 [Date display]
Select whether to enable date display over images. If
[Enable] is selected, date information will be displayed
over images.
2 [Position of date display]
Select [Upper left], [Upper right], [Lower left] or [Lower
right] for the position of date display information.
3 [Format of date display]
Select [YYYY/MM/DD], [DD/MM/YYYY] or [MM/DD/YYYY]
for the format of the date display.
4 [Time display]
Select whether to enable time display over images. If
[Enable] is selected, display time information will be
displayed over images.
5 [Position of time display]
Select [Upper left], [Upper right], [Lower left] or [Lower
right] for the position of time display information.
6 [Text display]
Select [Display nothing], [Display designated string]
or [Display camera name] for the text string to display
over images.
If [Display designated string] is selected, the [Text
string display] set in 8 will be displayed.
If [Display camera name] is selected, the text string set
in [Camera Name (alphanumeric characters)] under
[Camera] will be shown (P. 5-9).
7 [Position of text display]
Select the position of text display from [Upper left],
[Upper right], [Lower left] or [Lower right].
8 [Text string display]
If [Display designated string] is selected in 6 [Text
display], set a text string up to 15 alphanumeric
characters to be displayed over images.
9 [Color of text]
Select [Black], [Blue], [Cyan], [Green], [Yellow], [Red],
[Magenta] or [White] for the color of text to be displayed
over the image.
A q [Color of text outline]
Select [Black], [Blue], [Cyan], [Green], [Yellow], [Red],
[Magenta] or [White] for the color of text outline.
A a [Color depth of text and outline]
Select [Fill text and outline], [Make text only
transparent], [Make text only translucent] or [Make text
and outline translucent] for the color depth of text and
outline to be displayed over the image.
Note
• The on-screen time display may not correspond with camera
time by several seconds (P. 5-8).
• Depending on image quality settings, on-screen display may
become difficult to decipher. Set after confirming appearance
on actual images.
• On-screen display is subject to intelligent function detections
(P. 6-7). Adjust as necessary.
Important
The on-screen time display is not suitable for usage where high
reliability is required. Use as reference information only where
utmost and constant reliability is required for surveillance.