Canon VB-M700F - Manual (Page 112)

8
-2
You can set the camera so that the following data is saved automatically to the camera's SD memory card. (“Chapter 5
Settings Page”, “[Memory Card] SD Memory Card Operations and Settings” (P. 5-29)).
• JPEG images stored when HTTP or FTP upload failed during network errors
• Log
Here is an explanation of how to access the data saved on the SD memory card.
„ Access to the SD Memory Card
Use FTP software (not bundled) to access the camera's IP address.
FTP Software Settings
Address: Camera IP address (factory default setting: 192.168.100.1)
User ID: Administrator user ID (factory default setting: root)
Password: Administrator password (factory default setting: camera)
„ SD Memory Card Directory Configuration
The SD memory card is mounted as the directory name “CANON” under “/mnt/card” in the camera's internal memory.
Subdirectories are created as follows.
SD Memory Card Access
...
..
...
..
....
.
Camera IP address/mnt/card/CANON
/UPLOAD
/00/000.JPG
/99/999.JPG
/LOG
/MSG
/MSG.1
Log
/MSG.5
SD Memory Card
JPEG Images Stored when
Upload Fails